2013年8月23日金曜日

An installation Arch Linux on BeagleBone Black

1.  Make an Arch Linux microSD for booting

The best installation manual I think is here.

http://archlinuxarm.org/platforms/armv7/ti/beaglebone-black

In accordance with the instructions in this manual, I have been able to install successfully.

2. Install software packages of my robot developing
And setting a environment for developing robot is able to use my post.

http://robot009.blogspot.jp/2013/03/raspberry-pi-arch-linux.html


3. Setting for microSD booting on BeagleBone Black
It need a operation below to boot from microSD card.

[root@rcmp-r07 ]# mount /dev/mmcblk1p1 /mnt
[root@rcmp-r07 ]# cd /mnt
[root@rcmp-r07 ]# wget http://archlinuxarm.org/os/omap/BeagleBone-bootloader.tar.gz
[root@rcmp-r07 ]# tar zxvf BeagleBone-bootloader.tar.gz -C .
[root@rcmp-r07 ]# cd ..;sync;sync
[root@rcmp-r07 ]# umount mnt

Peace!!

0 件のコメント:

コメントを投稿